Manage stand orders
Select Option
Lenord, Bauer & Co. GmbH
Dohlenstr. 32,
46145
Oberhausen
Germany
Germany
Location
Hall map
Fairground map
Our range of products
Product categories
- 01 Packaging machines and devices
- 01.02 Filling and packaging
- 01.02.04 Fill and seal machines (FS) for
- 01.02.04.02 Fill and seal machines (FS) for Bags
Fill and seal machines (FS) for Bags
Our products
Product category: Fill and seal machines (FS) for Bags
Automation of Infeed Axes
Actuators enable fast format changes in production plants. However, their cabling and integration in automation environments is often time-consuming and labour-intensive. This is different with our system: We offer you a complete system solution for the efficient and flexible integration of actuators into modern production plants.
Our system consists of three individual elements that can be flexibly combined as required: a decentralized electronic unit for flexible fieldbus integration, different actuators and a hybrid cable.
The core of the system is the GEL 6505 Box. Up to 5 actuators can be connected to this decentralized electronic unit via hybrid cable. The box controls and monitors the motors. In the event of a fault, e.g. an EMERGENCY STOP operation, the power supply of the control electronics and the actuators is retained. Condition monitoring and bus communication also remain active. To protect the hybrid cables, an additional wire protection is integrated in the box.
It can be optionally equipped with PROFIBUS-DP, CANopen, PROFINET I/O, EtherNet/IP, POWERLINK, EtherCAT or Sercos III fieldbus modules. The integration into the higher-level system control is carried out via software function blocks. You can currently choose between CODESYS®, Step 7®, RSLogix5000 and Sercos III.
New is the modular box from Lenord + Bauer. It can be used to automate up to 17 secondary axes with intelligent actuators. The functional scope of the modular box can be extended in future by means of optional software add-on packages.
Advantages of the Lenord + Bauer system:
- Compact system solution for automating infeed axes
- Optional food grade stainless steel housing or rigid aluminium housing to IP 67
- Depending on the version, optionally with UL component recognition or UL listing
- Common Fieldbus and Real-Time Ethernet Profiles
- Time- and cost-saving wiring using hybrid cables
- Innovative connection concept with integrated cable protection and power management
- Fast setup due to existing functional blocks for various system controls including an easy-to-use support tool
Our system consists of three individual elements that can be flexibly combined as required: a decentralized electronic unit for flexible fieldbus integration, different actuators and a hybrid cable.
The core of the system is the GEL 6505 Box. Up to 5 actuators can be connected to this decentralized electronic unit via hybrid cable. The box controls and monitors the motors. In the event of a fault, e.g. an EMERGENCY STOP operation, the power supply of the control electronics and the actuators is retained. Condition monitoring and bus communication also remain active. To protect the hybrid cables, an additional wire protection is integrated in the box.
It can be optionally equipped with PROFIBUS-DP, CANopen, PROFINET I/O, EtherNet/IP, POWERLINK, EtherCAT or Sercos III fieldbus modules. The integration into the higher-level system control is carried out via software function blocks. You can currently choose between CODESYS®, Step 7®, RSLogix5000 and Sercos III.
New is the modular box from Lenord + Bauer. It can be used to automate up to 17 secondary axes with intelligent actuators. The functional scope of the modular box can be extended in future by means of optional software add-on packages.
Advantages of the Lenord + Bauer system:
- Compact system solution for automating infeed axes
- Optional food grade stainless steel housing or rigid aluminium housing to IP 67
- Depending on the version, optionally with UL component recognition or UL listing
- Common Fieldbus and Real-Time Ethernet Profiles
- Time- and cost-saving wiring using hybrid cables
- Innovative connection concept with integrated cable protection and power management
- Fast setup due to existing functional blocks for various system controls including an easy-to-use support tool
Company news
Date
Topic
Download
Jan 2, 2020
Intelligent Format Changes
To meet the demands of modern industrial automation, Lenord + Bauer has developed a cascadable control unit for its positioning system. As the node in the Ethernet-based network, the modular SeGMo-Box takes over the control of up to 17 machine axes, enabling the individual modules to be coordinated flexibly with the machine.
In modern packaging machines, positioning systems ensure efficient and reproducible format changes. The modular SeGMo-Box from Lenord + Bauer allows up to 17 secondary axes to be automated with intelligent positioning drives. A maximum of four boxes can be combined into a logical unit. At the heart of the modular control unit is the CPU module in the master box. What are known as COM modules ensure communication between the individual boxes with four or nine selectable module slots. Each drive is connected to a module by just one hybrid cable. The beauty of this cable is that the power supply for the motor is separate to that for the logic, which means that communication and diagnostic functions are maintained even while the motor power supply is switched off. To optimise cable lengths, the boxes can be located at a number of places across the system. Grouping positioning drives together via the configuration of the distributed boxes allows parts of a system to be switched off safely.
As a subsystem, the modular SeGMo-Box relieves the communication network of the machine and optimises the flow of data, while the CPU module, as the node, handles communication with the machine control system (PLC). The configurable Ethernet-based real-time interface supports communication profiles such as PROFINET, EtherCAT, POWERLINK, EtherNet/IP and Modbus/TCP. The proven function blocks (FBs) of the existing PowerDRIVE-Box are used to integrate the system into the machine controller. The FBs generate the traversing tasks needed in order to control the drives and forward status data such as motor current, absolute position, device temperature and thresholds to the PLC. Analysis of this device data assists in the preventative maintenance of the machine, for instance.
The CPU module can also exchange data by means of a USB port or web browser. This allows parameter sets to be written to the CPU and status data to be read and processed directly.
In the future the range of functions of the modular SeGMo-Box can be extended via optional software add-on packages.
In modern packaging machines, positioning systems ensure efficient and reproducible format changes. The modular SeGMo-Box from Lenord + Bauer allows up to 17 secondary axes to be automated with intelligent positioning drives. A maximum of four boxes can be combined into a logical unit. At the heart of the modular control unit is the CPU module in the master box. What are known as COM modules ensure communication between the individual boxes with four or nine selectable module slots. Each drive is connected to a module by just one hybrid cable. The beauty of this cable is that the power supply for the motor is separate to that for the logic, which means that communication and diagnostic functions are maintained even while the motor power supply is switched off. To optimise cable lengths, the boxes can be located at a number of places across the system. Grouping positioning drives together via the configuration of the distributed boxes allows parts of a system to be switched off safely.
As a subsystem, the modular SeGMo-Box relieves the communication network of the machine and optimises the flow of data, while the CPU module, as the node, handles communication with the machine control system (PLC). The configurable Ethernet-based real-time interface supports communication profiles such as PROFINET, EtherCAT, POWERLINK, EtherNet/IP and Modbus/TCP. The proven function blocks (FBs) of the existing PowerDRIVE-Box are used to integrate the system into the machine controller. The FBs generate the traversing tasks needed in order to control the drives and forward status data such as motor current, absolute position, device temperature and thresholds to the PLC. Analysis of this device data assists in the preventative maintenance of the machine, for instance.
The CPU module can also exchange data by means of a USB port or web browser. This allows parameter sets to be written to the CPU and status data to be read and processed directly.
In the future the range of functions of the modular SeGMo-Box can be extended via optional software add-on packages.
About us
Company details
In the field of packaging technology, the name Lenord + Bauer stands for high-quality solutions for fully automatic format adjustment. With our system, the format changeover only takes a few minutes and can be reproduced without any problems. We ensure shorter set-up times, exact repeat accuracy and high flexibility in your production line.
We are an internationally active specialist in the field of motion sensors and integrated drive technology. In the Machinery and Mobility sectors, we develop, produce and market technologically leading solutions. The focus is on machine tools and packaging machines as well as rail transport. In addition to our standard products, we also offer customer-specific solutions.
For over 50 years, our customers have benefited from our high level of technical consulting expertise and our expert knowledge in customer applications.
We are an internationally active specialist in the field of motion sensors and integrated drive technology. In the Machinery and Mobility sectors, we develop, produce and market technologically leading solutions. The focus is on machine tools and packaging machines as well as rail transport. In addition to our standard products, we also offer customer-specific solutions.
For over 50 years, our customers have benefited from our high level of technical consulting expertise and our expert knowledge in customer applications.
Company data
Target groups- Food
- Beverages